Call
Ships to all 50 states · Printed in San Diego

Your Parts, Printed
as Fast as One Day.
Shipped Nationwide.

Upload a file and get a real price in seconds. We print in San Diego and ship to every state — rush parts in as little as one business day.

Get an instant quoteor call (844) 907-3568
No file on this device?
1M+
Parts Produced
24/7
Instant Quoting
Multicolor
Multi-Material Printing
Expert
Engineering Support

Trusted by

AXONUC San DiegoGeorgia TechGoogleTaylor GuitarsHavikWrensilvaMELJACAdvantest
How it works

Three steps to your parts

Step 01

Upload Your File

Drop your STL, STEP, OBJ, or 3MF file. No account required. Get a real price in seconds.

Step 02

Configure Your Build

Pick material, color, layer height, finish. PLA to carbon fiber nylon. Standard to rush.

Step 03

We Print & Ship

Parts go to our San Diego print farm. Every part passes inspection. Tracking from print bed to your door.

What we do

Services

01 · Instant Quote

3D Printing

Real functional parts. PLA, PETG, nylon, carbon fiber, TPU. Upload, configure, done.

Learn more→
02 · We Design It

CAD Design

Have an idea but no file? We turn your concept into a print-ready 3D model.

Learn more→
03 · No Minimums

Mass Production

1 part or 10,000. No tooling costs, no minimums.

Learn more→
04 · Reverse Engineering

3D Scanning

Turn physical parts into accurate CAD files. Perfect for legacy parts, inspection, and design iteration.

Learn more→
Hundreds of identical grey 3D printed housings staged in trays on a chrome production rack — a full run coming off the TAKT 3D print farm without injection tooling

Make thousands.
Keep it lean.

No tooling, no minimums, no mold costs. Get production-quality parts without the overhead of injection molding.

Break-even vs. injection molding is usually a few thousand parts — below that, FDM production is usually faster and cheaper than cutting a mold.

$0
Tooling cost
1–10K+
Parts per run
10–20
Day lead time
SD
Local pickup
Learn about production runs
Industries

Where our parts tend to end up

Medical

Device enclosures, anatomical models, and R&D prototypes for medtech teams

→

Robotics

End effectors, brackets, lightweight structural parts

→

Aerospace

Carbon-fiber brackets, jigs, and R&D parts for UAV and space-hardware programs

→

Consumer Electronics

Enclosures, ESD-safe parts, multi-SKU support

→
A black 3D printed locating fixture on a dark workbench, beside the hand sketch it started as and a laptop showing its CAD model — the sketch-to-part path TAKT 3D's design service runs

Don't have a file yet?
Talk to us.

Our engineering team can take your sketch, photo, or idea and turn it into a print-ready 3D model. First consultation is free.

  • Sketch to CAD file from hand drawings
  • Photo reverse engineering and 3D reconstruction
  • STL repair, mesh fixing, file conversion
  • Print-ready optimization for FDM
Book a free consultation

Prefer to talk now? (844) 907-3568

What clients say

Engineers who've shipped with us

“TAKT 3D turns our files around fast with consistent quality every run. They’ve become a reliable part of our workflow.”
Jean-Luc
Meljac · Parts production
“Leo and the team took our rough concept and walked it through to a design we could actually build. Responsive from day one.”
Bob Perrine
Project design client
“Brought them an idea and left with a CAD file ready for production. Patient, technical, and fast.”
David Cripe
CAD design client

Common questions
before you upload.

Is FDM strong enough for production?
Yes — when the material matches the load. PA6-CF reaches 130 MPa tensile with a 180°C heat-deflection temperature, and handles bolt torque and daily assembly cycles. For structural brackets and tooling we spec PA6-CF, PAHT-CF or PPS-CF; for enclosures and housings PETG or ABS. Material selection is part of DFM review on every quote.
Can I see quality before committing to a full batch?
Yes. Production runs over 50 parts go through first-article review — you approve one real part in your hands before the full batch prints. Read the mass production process →
I don't have a CAD file — can you still make the part?
Yes. Send a sample, a sketch with dimensions, or a reference photo and we will model it. Photo-to-CAD and reverse-engineering from samples are part of our CAD design service. Typical turnaround is 2–3 days from sample to printable file. Read about the CAD service →

Related

A production batch of black 3D printed housings with grey caps marked TOP, staged on the TAKT 3D bench for assembly
Ready when you are

Your parts are waiting.

Upload your file now. Get a real price in seconds.

Get an Instant Quote